DIY conversation in our email inbox: (do you have a question yourself - use the ?Help button at the bottom of every page to ask us)
We have a 1950's-1970's parquet flooring in the kitchen and dining room which is in need of some tlc, however as we plan to lift it and re-lay it at a later date when we knock the two rooms into one, for now we would like a 'quick fix' for the kitchen area which is damaged.
The floor has a small area which has been covered by furniture which appears to be bare wood, small areas of grey wood where the current surface (wax, polish or oil, i'm not sure) has worn and small areas of water damage.
We do not want to sand it at this stage and were planning on using white spirit and wire wool to remove the existing surface coating. What would be the best product to then apply to match the original surface coating?
Many thanks in advance.
Nice floor! And worth restoring - when the time is there.
For the time being you could treat the floor with a suitable maintenance product to keep the wood protected against more water spillages. Wire-wool etc will not completely shift the original finish so there might be colour differences until you can sand everything back to its bare wood again.
The best product to use for now - which does mean "hand and knees" work - would be Aunt Polly's polishing wax - light yellow. In the olden days this was used to treat bare wood (a coat of 4 - 5 applied), but in this circumstances you could apply 1 coat over areas still "covered" by the existing oil/wax finish and 2 coats (at least) on the bare areas.
Hope this helps
Karin Hermans - Wood You Like Ltd
Many thanks Karin.