When you remove your carpet and discover there is a parquet floor hiding underneath it is most often worth to restore this wooden feature - but sometimes you can encounter (small) problems. We received the following question on the very subject (have a question yourself, use the ?Help button at the bottom of every page)
I have recently purchased a new property and discovered there there is original parquet flooring throughout the ground floor. I have removed the carpet and the grippers to fully check the floor throughout. There are a few loose blocks but can be glued back down, however in 2 areas of either end of the room, there does appear to be zig zag marks which seem to be identical to the pattern on the bottom of the underlay, I have tried to remove this with plain water but with no success.
Ideally we don't want to sand the floor as it is in perfect condition other than this and the colour is great so do not want any lighter. From experience are these marks common? would they come off if we were to use your eco clean line?
My concern is if we do sand is the mark likely to have imbeded into the block so would not disappear anyway?
Any help you can give would be most appreciated
It is one of the more simple to solve problems you can encounter when lifting carpet and (re)discovering a wonderful wooden floor. If you are so lucky to do this and are not sure where to start with the revitalising of your floor, read our article on this - most have found it very helpful.